THE AMMONITE
dual stack ocxo network switch

With all the streaming services and devices a network switch is the base of a good audiophile system. With the knowledge of the Dodo dual linear power supply we’ve developed the Ammonite. A true audiophile network switch. Purely designed for audio.

Dual stack 100Mb/s switches, where the first switch is to be used for connecting your router and devices like NAS or Set-top boxes. The second switch is only to be used for the audio system.

An ultra silent dual linear power supply is the heart of the performance of the Ammonite. A dedicated power supply feeds the OCXO clock. This clock is controlling both switches so they are completely synchronized. The second power supply is feeding both switches with ultra low noise power.

All this resulting in a powerful switch that will amaze you with a deep soundstage, micro details and musicality.

Features

  • Stacked 100 Mbps switch for lower noice floor
  • Shared TCXO or OCXO for optimized synchronization
  • Ultra-low RMS noise and Ultra-high PSRR linear power supply
  • Both the switch and the clock have their own separate linear power supply
  • Nichicon and Panasonic Audio grade low ESR capacitors
  • PPS high-frequent decoupling capacitors
  • Schottky Rectifier Diodes
  • Medical grade static shielded transformer
  • Rhodium plated Furutech IEC inlet
  • Ceramic Fuse
  • Hand made in the Netherlands
  • CE

Specifications

  • Input voltage: 115VAC or 230VAC
  • Power consumption: 10 Watt idle
  • Dimensions (LxWxH): 295 x 240 x 50 mm
  • Weight: 3.3 Kg
BUY

THE DODO
dual linear power supply

The Dodo, a very precise power supply with an extremely low noise floor. Using only premium components, we have managed to develop a power supply that meets the requirements of the most demanding products, but is also capable of sustaining current of up to 2.5 Amps.

A flexible power supply and therefore extremely suited to provide clean power to all sensitive devices such as modem/routers, switches, set top boxes, streamers and D/A-converters.

More and more you see listeners upgrading their devices such as network switches with highly accurate crystal oscillators. What is not often known is that the precision of those clocks (TCXO or OCXO) rely on the quality of the power supply. A power supply with a very low noise floor and stability ensures that the clock performs at its best.

The challenge of a very precise power supply with an extremely low noise floor lies mainly in the maximum current that the power supply can deliver. When a device consumes more current, the quality of the power supply deteriorates. However by using premium components we have managed to develop a power supply that meets the requirements of the most precise crystal oscillators, but is also capable of sustaining current up to 2.5 Amps. This makes the Dodo flexible and therefore extremely suitable to provide clean power to all devices. Such as set top boxes, audiophile switches, streamers and digital to analog converters.

Another crucial point is speed of the power supply. Nowadays it is a hype to cram as much capacity into a power supply as possible. Looks cool with all those large capacitors… but from our perspective this will not improve the quality of the power supply.

Let’s compare the capacity of an electrolytic capacitor with a swimming pool, in this scenario a device does not consume electricity but water. Whenever the device needs electricity (water), the capacitor (pool) must be topped up. You can imagine that the water in a pool starts to wave and the larger the pool, the longer it takes before the water to settle again. The bottom line is that a power supply with (too) much capacity needs more time to stabilize. For this reason, we have chosen to use a very low ESR electrolytic capacitor whose value is proportional to the maximum power that the power supply can deliver.

Features

  • Ultra-low RMS noise and Ultra-high PSRR
  • Extremely high bandwidth
  • 2 Independent outputs: 3,3 VDC, 5 VDC, 7 VDC, 9 VDC, 12 VDC, 15 VDC or 19 VDC (all up to 2.5A)
  • Separate Rail Design with separate Ground. Guarantee No Cross RFI/EMI Interference
  • Nichicon and Panasonic Audio grade low ESR capacitors
  • PPS high-frequent decoupling capacitors
  • Schottky Rectifier Diodes
  • Medical grade static shielded transformer
  • Fanless design for truly quiet operation
  • Rhodium plated Furutech IEC inlet and gold plated GX16 connectors
  • Ceramic Fuse
  • standard 2x DC cables 50cm
  • Hand made in the Netherlands
  • CE

Specifications

  • Input Voltage: 115VAC or 230VAC
  • Output Offset Voltage (load 1000mA): 0,001 Volt
  • Output RMS Noise (load 1000mA): < 0,8 µV
  • Ripple Rejection: 50 dB at 10MHz
  • Dimensions (LxWxH): 230 x 124 x 80 mm
BUY

THE SAUROPODA
line conditioner (7 outlet)

With a lot of noise and disturbance from inside your home, there’s also a lot of noise coming from outside. When cleaning up this noise a new world will open up when listening to your favorite music.

We’ve created this line conditioner in a relative small case that you can just put in your hifi rack. With the seven outlets there is enough room for most of the hifi equipment. Where traditional filtering leads noise to ground that can picked up by your audio equipment, we use parallel filtering that reacts as a high frequency short circuit.

Filtering will start to work from 100Hz en will increase when the frequency rises. We measured a decrease from 80 dB on 40 kHz. It’s absolute silent and will clean up your power in the best way possible. Enjoy new dynamics and details you have never heard before!

Features

  • 7 outputs with star connection
  • high quality ofc nano wiring
  • Galvanic isolation
  • Differential Parallel Noise-filtering
  • Ground-noise isolation
  • Inrush current limiter
  • Medical grade static shielded transformers
  • Low output impedance
  • Rhodium plated Furutech IEC inlet
  • Rhodium plated Furutech outlets
  • Ceramic Fuse
  • Hand made in the Netherlands
  • CE

Specifications

  • Input Voltage: 115VAC or 230VAC
  • Output Voltage: 115VAC or 230VAC
  • Max Output power: 700 VA
  • Max Current peak: 160 A
  • Noise Suppression: – 80 dB from 40 kHz
  • Dimensions (LxDxH): 450 x 373 x 90 mm
  • Weight: 22 kg
BUY

THE ASTEROIDEA
power distributor (5 outlet)

When we’ve developed this product, we wanted to make a product that would be an eye-catcher. Not hidden behind a set, but placed in sight with all the other hifi equipment. The outlets and the inlet are facing backwards and not upwards as most distributors do. Because of its depth (17cm), the power plugs can easily be fit at the back and still have enough room in a hifi-rack or cabinet.

All outlets and the inlet are Furutech Rhodium plated NCF. Internally all outlets are star-wired with exact the same length for phase, neutral and earth. All with high quality wiring.

You can choose for an optional HF parallel filter. This filter is applied to all outlets and only effects High Frequency Noise. So no loss of dynamics is possible.

Features

  • 230V-50/60Hz
  • Max. 16A/3600W
  • 5x Furutech FI-E30 NCF Rhodium Schuko Outlets
  • 1x Furutech FI-06 NCF Rhodium IEC inlet
  • True Star-Wired Phase, Neutral and Ground
  • High Quality 2.50 mm² wiring
  • 330x170x80mm (LxDxW)
  • CE
BUY

THE NAUTILUS
power distributor (7 outlet)

When we’ve developed this product, we wanted to make a product that would be an eye-catcher. Not hidden behind a set, but placed in sight with all the other hifi equipment. The outlets and the inlet are facing backwards and not upwards as most distributors do. Because of its depth (17cm), the power plugs can easily be fit at the back and still have enough room in a hifi-rack or cabinet.

All outlets and the inlet are Furutech Rhodium plated NCF. Internally all outlets are star-wired with exact the same length for phase, neutral and earth. All with high quality wiring.

You can choose for an optional HF parallel filter. This filter is applied to all outlets and only effects High Frequency Noise. So no loss of dynamics is possible.

Features

  • 230V-50/60Hz
  • Max. 16A/3600W
  • 7x Furutech FI-E30 NCF Rhodium Schuko Outlets
  • 1x Furutech FI-06 NCF Rhodium IEC inlet
  • True Star-Wired Phase, Neutral and Ground
  • High Quality 2.50 mm² wiring
  • 450x170x90mm (LxDxH)
  • CE
BUY